Sunday 11-07-04

I got to the house around 2ish or so and cleaned all the crap out of the bed of the truck, washed it out and scrubbed it with a broom and disk soap.

Then I started doing the base molding in the Master Bathroom.  Before I could start I had to put the kick plate on the cabinets.  I used the oak backsplash from upstairs since dad stained it the wrong color.  Once I got that on, started the molding. 

I used the molding that I painted the other day but ran out so I have once piece on the West wall that will need to be painted.  I had to cut one piece to go over the kick plate and one piece I had to trim a bit to fit under the cabinets.  I got it all on and the corners glued.  Tomorrow after the glue is dry I will sand them down really good and prime and paint the corners.

I caulked the trim and then caulked the trim in the bedroom.

After that, I put the blinds up and then put the pull knobs on the cabinets.

I filled the the whirlpool and plugged in the pump and fired it up to see how it worked.  It works good :)

I took pictures of Matts theater, see his pictures on the main page.